微波消解-ICP-OES法测定哈氏C-276合金中Cr、Fe、Mo、W元素

建立了微波消解-电感耦合等离子体发射光谱法同时测定哈氏C-276合金中Cr、Fe、Mo、W元素含量的分析方法.采用10 m L HCl-HNO3-HF(体积比为10:1:1)混合酸溶解试样.研究了合金不同溶解方式、元素谱线的选择、背景校正等试验条件,并对仪器分析参数进行了优化,确定了最佳的试验条件,各元素分析谱线依次为Cr2 67.716 nm、Fe 238.204 nm、Mo 202.031 nm、W 209.712 nm,建立的校准曲线各元素相关系数均在0.999 5以上.实际样品分析中,加标回收率为97.8%~102.7%,重复测定结果的相对标准偏差小于1.64%(n=6),试验测定结果与镍基标准样品标准值做对照,结果表明方法准确、快速,能够满足日常生产的检测要求.     

常压敞开式质谱离子源发展趋势

近年来常压敞开式离子源凭借快速、原位、实时离子化样品等优势,被广泛应用于样品快速筛查、真伪鉴定、质谱成像等领域,已成为当今离子源的研究热点,受到了学术界及仪器制造、化学和生物分析等相关产业界的广泛关注。目前,该类离子源朝着克服基体效应、提高样品表面定位能力及增加离子传输距离等方向发展。本文主要介绍了可以很好解决上述问题并具有代表性的三种常压敞开式离子源:电喷雾萃取离子源(EESI)、介质阻挡放电离子源(DBDI)及空气动力辅助离子源(AFAI),重点涉及原理以及在此基础上所做的设计改进和应用进展。     

微波消解–石墨炉原子吸收光谱法测定空气中碲

建立微波消解–石墨炉原子吸收光谱法测定空气中的碲。采用微孔滤膜收集样品,以硝酸–双氧水混合体系微波消解滤膜,氯化钯为基体改进剂,在优化的仪器工作条件下测定。碲的质量浓度在0~15μg/L范围内与吸光度线性关系良好,相关系数为0.999 5,方法检出限为0.14μg/L。样品加标回收率在95.6%~104.0%之间,测定结果的相对标准偏差为1.15~1.37%(n=7)。该方法操作简单、灵敏度高,适用于空气中微量碲的测定。     

Fibrillar structure development of polyacrylonitrile fibers treated by ultrasonic etching in oxidative stabilization

Polyacrylonitrile fibers were oxidatively stabilized through 10 gradient‐elevated temperature zones in sequence. The ultrasonic etching method was used for fibril separation of fibers heated at different temperatures, and the fibrillar structure development was studied by scanning electron microscopy. The voids among fibrils are the weak combination points. Under ultrasonic etching, the voids are enlarged. Subsequently, the solvent enters and spreads among fibrils, which results in the separation of fibrils. Separated fibrils with diameters of 100–400 nm appear in fibers heated at less than 235°C. Fibrils in fibers heated from 195°C to 235°C tend to adhere to each other, and the observed macrofibrils are composed of several to dozens of fibrils. For fibers heated from 195°C to 245°C, only a few fibril bundles emerge on the skin near the fiber end, and the fibrils manifest themselves as numerous protuberances on the cross section. In the ranges of 255–275°C, fibrils compactly combine with each other, which suggests insolubility and infusibility, and no separated fibrils appear. The fibrils arrange in a systematic way along the fiber axis and grooves parallel to the fiber axis on the fibers' surface. These grooves are the macro behavior of fibrils arranging on the fiber surface. Copyright © 2017 John Wiley & Sons, Ltd.     

A green one-pot three-component synthesis of α-aminophosphonates under solvent-free conditions and ultrasonic irradiation using Fe3O4@SiO2-imid-PMAn as magnetic catalyst

An efficient and environment friendly process for the synthesis of α-aminophosphonates has been devised. Through a one-pot three-component condensation of various aldehydes, amines, and triethyl phosphite in the presence of Fe₃O₄@SiO₂-imid-PMAⁿ nanoparticles as magnetic catalysts under solvent-free conditions and ultrasonic irradiation, α-aminophosphonates were obtained with excellent yields. The reactions under solvent-free conditions at room temperature are compared with the ultrasonic-assisted reactions. This new procedure has notable advantages such as short reaction time, excellent yields, easy purification, and the absence of any tedious workup or purification. The aforementioned catalyst could be easily recovered by an external magnetic field and can be reused for six consecutive reaction cycles without significant loss of activity. In addition, SEM and DLS of the catalyst after the reaction cycle were investigated.     

N—H…X (X = Cl and Br) hydrogen bonds in three isomorphous 3,5‐dichloropyridinium salts

Specific short contacts are important in crystal engineering. Hydrogen bonds have been particularly successful and together with halogen bonds can be useful for assembling small molecules or ions into crystals. The ionic constituents in the isomorphous 3,5‐dichloropyridinium (3,5‐diClPy) tetrahalometallates 3,5‐dichloropyridinium tetrachloridozincate(II), (C₅H₄Cl₂N)₂[ZnCl₄] or (3,5‐diClPy)₂ZnCl₄, 3,5‐dichloropyridinium tetrabromidozincate(II), (C₅H₄Cl₂N)₂[ZnBr₄] or (3,5‐diClPy)₂ZnBr₄, and 3,5‐dichloropyridinium tetrabromidocobaltate(II), (C₅H₄Cl₂N)₂[CoBr₄] or (3,5‐diClPy)₂CoBr₄, arrange according to favourable electrostatic interactions. Cations are preferably surrounded by anions and vice versa ; rare cation–cation contacts are associated with an antiparallel dipole orientation. N—H…X (X = Cl and Br) hydrogen bonds and X …X halogen bonds compete as closest contacts between neighbouring residues. The former dominate in the title compounds; the four symmetrically independent pyridinium N—H groups in each compound act as donors in charge‐assisted hydrogen bonds, with halogen ligands and the tetrahedral metallate anions as acceptors. The M —X coordinative bonds in the latter are significantly longer if the halide ligand is engaged in a classical X …H—N hydrogen bond. In all three solids, triangular halogen‐bond interactions are observed. They might contribute to the stabilization of the structures, but even the shortest interhalogen contacts are only slightly shorter than the sum of the van der Waals radii.     

The S.M.A.R.T. (small mass,affordable, rapid,transfer-less) digestion method for heavy metal determinations

The S.M.A.R.T. (small mass, affordable, rapid, transfer-less) digestion method was developed to determine heavy metal concentrations in small sample masses. The S.M.A.R.T. digestion method is a hot water bath digestion where sample digestion and dilution are performed in the original sample tube. This method is faster than the typical methods used and reduces potential sources of error. Masses as small as 0.01 g have been digested and analysed using this method. The preparation and digestion time is reduced from 10 h to less than 4 h. Acid volumes are reduced from millilitres to microlitres and the only disposable supplies needed are sample tubes and pipette tips. Method accuracy was determined by digesting seven replicates of two standard reference materials using the S.M.A.R.T. method and analysing samples by inductively coupled plasma mass spectrometry. The S.M.A.R.T. digestion method was found to provide excellent recoveries for Al (76 ± 2.7%), Mn (99 ± 11%), Co (92 ± 17%), Ni (93 ± 28%), Cu (109 ± 33%), Zn (97 ± 7.1%), As (108 ± 20%), Sr (90 ± 12%), Mo (84 ± 23%), Ag (91 ± 1.8%), Cd (95 ± 6.2%), Sn (139 ± 52%) and Pb (95 ± 22%). This study has successfully developed an efficient and reproducible digestion method for heavy metal determination in limited biomass samples.     

Comparative study of bulk and partial digestion methods for airborne PM10-bound elements in a high mineral dust urban site in Constantine,Algeria

When high mineral loads in atmospheric particulate matter (PM) are present, particular attention should be paid to the selection of appropriate acidic digestion protocols for wet chemical analysis. We report on a comparative study of elemental recovery yields from five different pre-analytical acid digestion procedures for mineral-rich urban background PM₁₀ samples collected in the city of Constantine (Northeastern Algeria). Five reference materials (NIST 1633b, UPM 1648, NAT-7, SO-2 and SO-4) were also digested according to the same protocols. The selected acidic digestion/extraction procedures are widely used for PM chemical analysis and comprise P1 (HNO₃/HF/HCl), P2 (HCl/HNO₃), P3 (HCl/H₂O₂/HNO₃), P4 (HNO₃/HF/HClO₄) and P5 (HNO₃/H₂O₂); the latter assisted with microwave digestion. Elemental recovery yields were compared for major and trace elements typically determined in PM for source apportionment analysis and the results evidenced large differences. For most elements, the bulk extraction procedures (requiring the use of HF) allowed a full elemental recovery, particularly for elements that are associated with aluminium silicate species and oxides that are resistant to mild acid attack. In contrast, in the extraction protocols without HF low recovery yields were obtained for elements such as Al, Ti, Zr, Sc and other aluminium silicate-related elements in PM₁₀ samples with high mineral dust load. We highlight that the European standard digestion method EN-14902:2005 should be applied specifically for the metals for which this method was developed, but caution should be taken when the analysis of other elements in PM is required, especially in urban areas where road and vehicle wear dust is likely to be a major component of ambient PM. When using wet chemistry analysis for PM source apportionment studies, we strongly recommend HF bulk dissolution of samples to ensure the reliability of the geochemical information when coupled with an appropriate analytical tool.     

大学化学云计算学习环境与协作学习模型的构建

"云计算"在教育教学中的应用构建了"云计算"辅助教学的概念。21世纪的教学方式是以学为主、以教为辅,学习的方式也从个人学习变成了协作学习,这正是"云计算"辅助教学的核心。本文回顾了计算机辅助教学的发展,对"云计算"学习环境与协作学习模型的构建进行了分析探讨,并以"大学化学云学堂"为案例解析了"云计算"学习环境与协作学习模型建立的实际应用,阐述了其设计思路和实现方法,以期为"云计算"辅助学习与教学研究提供一些帮助。     

超声提取–离子色谱法测定土壤易溶盐中的氯离子和硫酸根离子

采用超声提取的方式,以离子色谱法测定土壤易溶盐中的氯离子和硫酸根离子。对实验条件进行了优化,色谱柱为NJ–SA–4A柱(250 mm×2 mm),保护柱为SI–92G柱(50 mm×4 mm),淋洗液为1.8 mmol/L Na_2CO_3–1.7mmol/L NaHCO_3,流量为1.0 m L/min;在40℃下,对土壤样品提取10 min。Cl~–和SO_4~(2–)在检测范围内均线性良好,线性相关系数为0.999 8,加标回收率分别为95.0%~99.0%,96.0%~101.0%,测定结果的相对标准偏差分别为1.4%,1.0%(n=4)。与传统的方法相比,该法试剂用量少,操作简单,可用于土壤易溶盐样品的测定。